Klipsch RP-8060FA Dolby Atmos Floorstanding Speakers – Dual 8” Woofers / 150W RMS / 98 dB Sensitivity – Integrated Elevation Speaker + Hybrid Tractrix Horn

Klipsch RP-8060FA Dolby Atmos Floorstanding Speakers – Dual 8” Woofers / 150W RMS / 98 dB Sensitivity – Integrated Elevation Speaker + Hybrid Tractrix Horn

 

Experience the full depth and dimension of 3D surround sound with the Klipsch RP-8060FA floorstanding speakers — designed from the ground up to deliver both powerful front-stage audio and vertical Dolby Atmos height effects in a single, elegant cabinet. These premium speakers combine dual 8” Cerametallic™ woofers, a 1” titanium LTS tweeter in a Hybrid Tractrix® Horn, and a built-in Atmos elevation channel on top to create a true theater-grade experience at home.

Engineered with 150W RMS power handling, 98 dB sensitivity, and Klipsch’s acoustic innovations, the RP-8060FA fills even large rooms with deep bass, crystal-clear highs, and immersive 360° spatial audio — without needing extra overhead speakers or cluttered wiring.

---

🔧 Key Features at a Glance

• Integrated Dolby Atmos Elevation Speaker (top-mounted with own input)

• Dual 8” Spun Copper Cerametallic™ Woofers

• 1” Titanium LTS Tweeter with Hybrid Tractrix® Horn

• 150W RMS / 600W Peak Power Handling

• 98 dB Sensitivity @ 2.83V / 1m

• Frequency Response: 32Hz – 25kHz (main), 95Hz – 20kHz (Atmos)

• Tractrix Rear Port for Clean Bass Extension

• Separate speaker inputs for front and elevation channels

• Bi-amp / Bi-wire compatible terminals

• Available in Ebony or Walnut scratch-resistant veneer

• Magnetic grille with low-profile aesthetic

---

🌀 Immersive Sound from Every Angle – Built-In Atmos Channels

The standout feature of the RP-8060FA is its integrated elevation speaker, designed to reflect sound off your ceiling to produce Dolby Atmos’s trademark “height” effects. Unlike add-on modules, these elevation drivers are built into the top of the cabinet and precisely angled to match Klipsch’s Tractrix acoustic design.

With dedicated crossover and binding posts, the upward-firing Atmos driver operates independently from the main tower, allowing your AV receiver to drive it as its own height channel (usually front height or Dolby Enabled Speaker configuration).

This means you’ll hear helicopters fly overhead, raindrops falling above you, or ambient room effects that surround you completely — all with precise imaging and no added clutter.

---

🔊 Front Channel Power – Dual 8” Cerametallic Woofers

The main body of the RP-8060FA houses two 8-inch Cerametallic™ woofers, known for their light weight and extreme rigidity. These drivers offer deep, punchy bass and accurate mids, even at high volumes. Their stiffness prevents distortion, while their large surface area moves serious air for cinema-grade dynamics.

These are the same high-performance woofers found in the RP-8000F, but combined with Atmos functionality for a truly all-in-one front speaker solution.

---

🔊 1” Titanium LTS Tweeter with Hybrid Tractrix® Horn

High frequencies are handled by Klipsch’s 1-inch Linear Travel Suspension (LTS) tweeter, made from lightweight yet rigid titanium for minimal distortion and maximum detail. It sits inside the brand’s signature Hybrid Tractrix® Horn, which provides controlled directivity and a wide sweet spot, making the RP-8060FA an excellent performer in any listening position.

Whether you’re watching a dramatic film or enjoying a hi-fi stereo mix, this tweeter delivers clean, transparent highs with smooth roll-off.

---

🎯 98 dB Sensitivity – Incredible Efficiency, Immense Output

Thanks to its 98 dB sensitivity, the RP-8060FA delivers enormous sound output with relatively low amplifier power. This high efficiency allows you to get the most out of your AV receiver, giving you thunderous volume and dynamic headroom without distortion — perfect for high-impact home theater or live music listening.

---

🎥 Home Theater Ready – Elevation + Bass + Clarity in One Speaker

The RP-8060FA replaces the need to buy both tower speakers and separate Atmos modules. It’s designed to be the main front L/R speaker in any advanced home cinema system — especially Dolby Atmos, DTS:X, and Auro 3D systems.

Pair it with:

• RP-504C center channel

• RP-600M or RP-502S surrounds

• SPL-120 or SPL-150 subwoofer

And you’ll have a cinema-quality 5.1.2 or 7.1.4 system with minimal equipment and perfect speaker timbre matching.

---

🔈 Rear-Firing Tractrix Port – Controlled Bass Extension

The RP-8060FA features a rear-firing Tractrix® port that’s perfectly matched to the cabinet and woofer system. It allows for deep, smooth bass extension without port noise or chuffing — ideal for both music and movie content.

The rear port also enables you to place the speaker near a wall (with some breathing room) without muddying the sound, thanks to its flared geometry and internal airflow optimization.

---

⚙️ Independent Inputs – Full Control Over Main and Height Channels

The speaker includes two pairs of binding posts: one for the main speaker and one for the Dolby Atmos elevation channel. This allows you to:

• Drive both sections with a single AV receiver

• Bi-wire or bi-amp the main speaker section

• Control level calibration and crossover independently via your receiver

This setup ensures you have full flexibility for tuning and system design.

---

🪵 Premium Build and Finish – Designed to Look as Good as It Sounds

The RP-8060FA isn’t just about power — it’s a beautiful piece of furniture as well. The cabinet is built from reinforced MDF, covered in a scratch-resistant ebony or walnut veneer, with elegant satin-painted baffles. The magnetic grille can be left on for a sleek modern look or removed to showcase the stunning copper drivers.

Integrated rubber feet provide stability and vibration damping on any surface.

---

📊 Technical Specifications

---

✅ Ideal For:

• Dolby Atmos home theaters

• Large media rooms

• Audiophiles and cinephiles

• People who want a clean system with fewer boxes

• Those who want Klipsch’s best without extra modules

---

🏁 Conclusion – RP-8060FA: All-In-One Audio Brilliance

The Klipsch RP-8060FA is the ultimate front speaker for anyone serious about immersive sound. With built-in Dolby Atmos elevation, massive bass capability, and stunning horn-loaded detail, it simplifies your setup while upgrading your entire cinematic experience.

If you’re building a future-proof home theater that sounds as good as it looks, the RP-8060FA is your front-row ticket.

---

Explore the Klipsch Collection at Lux Audio